Talk to our Blade Expert Request a Blade Specialist to Give you a Call

HM-Titan MU TCT

HM-Titan MU TCT

5
Rated 5 out of 5
5 out of 5 stars (based on 2 reviews)

The high performance band saw blade HM-Titan MU was developed to cut a variety of different materials.
The special designed tooth geometry enables a better chip separation with low noise and high cutting rates.

Reduced cutting times combined with an excellent finish are ensured.

HM-Titan MU TCT

5
Rated 5 out of 5
5 out of 5 stars (based on 2 reviews)

The high performance band saw blade HM-Titan MU was developed to cut a variety of different materials.
The special designed tooth geometry enables a better chip separation with low noise and high cutting rates.

Reduced cutting times combined with an excellent finish are ensured.

Press Play & Listen to Our Blade Customers

  • graphic Free Shipping over $350 Australia wide
  • graphic Manufactured
    in Australia     Purchase Direct
  • graphic 100% Safety Only Secure Payments
  • graphic Australia Wide Shipping Only LIVE: Orders Placed Today
Order Now
Contact Info
Need Help? Speak to our Blade Gurus: 03 9005 7931Email Us
Talk to our Blade Expert
Get in Touch! Request a Blade Specialist to give you a Call

Technical Specifications

Item HM-Titan MU TCT
Materials Cut Squared Solids, Plates, Thick-walled Tubes and Solid Bars, Round Solids
Cutting Edge Style Variable
For Use With Saw Type Bandsaws

HM-Titan MU TCT

The high performance band saw blade HM-Titan MU was developed to cut a variety of different materials. The special designed tooth geometry enables a better chip separation with low noise and high cutting rates. Reduced cutting times combined with an excellent finish are ensured.

What does the Blade Cut?

Squared Solids

Plates

Thick-walled Tubes and Solid Bars

Round Solids

Standard order processing/manufacturing time is around 24-48hours

All orders placed before 4:00 pm Melbourne time go into production on the same day and dispatched the following afternoon.

Please Note: Bandsaw blades under the PREMIUM CATEGORY which include "TCT Timber, Carbide Grit and Diamond Coated Bandsaw Blades can take up to 4 weeks to 3 months to be shipped due to high demand and complexity of the production process.

For Enquires, please email [email protected] or phone 03 9005 7931.

  • Delivery policy

    We will arrange for the products to be delivered to the address for delivery indicated in your order. Each item will be subject to “Signed on Receipt”.

    We will use reasonable endeavours to deliver products on the date for delivery set out in our order confirmation or, if no date is set out in our order confirmation, within 7 days of the date of our order confirmation. However, we cannot guarantee delivery by the relevant date.

    We do however guarantee that unless there are exceptional circumstances all deliveries of products will be dispatched within 30 days of the later of receipt of payment and the date of our order confirmation

VIC 1 Day
NSW 2 Days
ACT 2 Days
TAS 3 Days
QLD 3 Days
NT 5 Days
SA 2 Days
WA 5 Days
5
Rated 5 out of 5
5 out of 5 stars (based on 2 reviews)
Excellent100%
Very good0%
Average0%
Poor0%
Terrible0%

Write a Review

They work! The delivery date was sooner than the estimated date

Rated 5 out of 5
May 3, 2022

Delivery date was sooner than the estimated date. Thank you.

Jasmine Smith

Where have you been all my life?!?

Rated 5 out of 5
May 3, 2022

Excellent service . They are great guys to talk to on the phone. Blades cuts like butter.

Markus Hutton
Purchase Your Blade
Add More Item

1. Select the width you require

Next Step

3. Select the Length (Round up to the Closest Increment)(Round up to the Closest Increment)

2. Now Enter the Exact Length in (mm) (Made to your Order)

Length is not correct, changed to maximum allow length.
Next Step

Adjust the wheels of the machine to their correct position (about the middle of the adjustment range)

  • Refering to the diagram below, measure the distance between the centre point of each wheel in mm (measurement D).
  • Now measure the radius of each wheel in mm (R1 and R2).
  • Use this formula to calculate the band length

3. Select the TPI (Teeth Per Inch)

The recommended TPI(s) will be shown automatically for your chosen blade width.

The number of teeth per inch (TPI) defines the pitch of the blade.

On some blades there are different pitches on the same blade. You must select the correct tpi for the thickness of material you are cutting. If the corrrect tpi is not chosen the blade life will be dramatically shortened.

Please use the following guide to select the correct tooth selection.









4. Great, Can I have your Name?

5. and your Contact Number?

6. Enter Quantity

Please Click Step 1 to Reload Blade Engine. Step 1

    Order Your Blade

    Order Details:

    Add to Cart
    Add to Cart

    Showing 1–12 of 78 results