The Bi-alfa cobalt extreme M51 bandsaw blade has an alloyed steel backing with high chromium content together with a HSSCo-M51 (contains 12% cobalt) cutting edge.
Due to the cobalt and tungsten content of the cutting tips, the blade has a high thermal and mechanical wear resistance which increases the blade life, especially when cutting long cross sections.
The hook tooth has a positive cutting angle of 10°. This tooth form is particularly suitable for cutting solid, thick-walled tubes and all higher-grade alloy material.
- M51 HSS tooth
- High-alloy tool steels, stainless steels, cast iron, heat resistant steel alloys.
- Materials with a hardness up to 50 HRc
- High wear and heat resistance.
- Long and reliable tool life.
- High shock resistance.
- For difficult to cut materials.
- Higher cutting rate.
Thick-walled Tubes and Solid Bars
Make sure you have the correct blade type for your application
Choose your specifications for your blade.
Type in your Blade length to size you require
Click add to cart, then proceed to purchase.
Have a cold drink, your job is done! Your Blade is on it's Way.
Blade Type x Length(mm) x Width(mm) x Depth(mm) x TPI
|Bimetal M51 x 27mm x 0.9mm x 1tpi||$69.30||Available||mm|
|Bimetal M51 x 27mm x 0.9mm x 2/3tpi||$69.30||Available||mm|
|Bimetal M51 x 27mm x 0.9mm x 3/4tpi||$69.30||Available||mm|
|Bimetal M51 x 27mm x 0.9mm x 4/5tpi||$69.30||Available||mm|
|Bimetal M51 x 27mm x 0.9mm x 4/6tpi||$69.30||Available||mm|