HM-Titan Alu TCT

5 out of 5 stars (based on 2 reviews)

The high performance band saw blade HM-Titan ALU is designed for cutting non-ferrous metals, especially aluminum. It is the best blade for cutting slabs and plates.

Due to improved bending fatigue strength of the high-alloyed backing strip, the band saw blade withstands the extreme blade speeds and feeds during these cutting applications and therefore offers a high productivity and blade life.

The unique tooth geometry satisfies even the highest demands with regard to the surface finish.

Home » TCT Metal Bandsaw Blades » HM-Titan Alu TCT

HM-Titan Alu TCT

5 out of 5 stars (based on 2 reviews)

The high performance band saw blade HM-Titan ALU is designed for cutting non-ferrous metals, especially aluminum. It is the best blade for cutting slabs and plates.

The unique tooth geometry satisfies even the highest demands with regard to the surface finish.

Free Shipping over $350 Australia wide
Manufactured
in Australia Purchase Direct
100% Safety Only Secure Payments
Virginia Australia Wide Shipping Only LIVE: Orders Placed Today

Order Now

Need Help? Speak to our Blade Gurus: 03 9005 7931Email Us

BULK DISCOUNT SAVE UP TO 15%
QTY	DISCOUNT
1	-
5+	10%
10+	15%

Technical Specifications

Item	HM-Titan Alu TCT
Materials Cut	Engine Block, Plates, Aluminium

Cutting Edge Style	Variable
For Use With Saw Type	Bandsaws

HM-Titan Alu TCT

The high performance band saw blade HM-Titan ALU is designed for cutting non-ferrous metals, especially aluminum. It is the best blade for cutting slabs and plates.

The unique tooth geometry satisfies even the highest demands with regard to the surface finish.

What does the Blade Cut?

Engine Block

Plates

Aluminium

Standard order processing/manufacturing time is around 24-48hours

All orders placed before 4:00 pm Melbourne time go into production on the same day and dispatched the following afternoon.

Please Note: Bandsaw blades under the PREMIUM CATEGORY which include "TCT Timber, Carbide Grit and Diamond Coated Bandsaw Blades can take up to 4 weeks to 3 months to be shipped due to high demand and complexity of the production process.

For Enquires, please email [email protected] or phone 03 9005 7931.

Delivery policy

We will arrange for the products to be delivered to the address for delivery indicated in your order. Each item will be subject to “Signed on Receipt”.

We will use reasonable endeavours to deliver products on the date for delivery set out in our order confirmation or, if no date is set out in our order confirmation, within 7 days of the date of our order confirmation. However, we cannot guarantee delivery by the relevant date.

We do however guarantee that unless there are exceptional circumstances all deliveries of products will be dispatched within 30 days of the later of receipt of payment and the date of our order confirmation

VIC 1 Day

NSW 2 Days

ACT 2 Days

TAS 3 Days

QLD 3 Days

NT 5 Days

SA 2 Days

WA 5 Days

5 out of 5 stars (based on 2 reviews)

Excellent100%

Very good0%

Average0%

Poor0%

Terrible0%

Write a Review

Finally a replacement blade **********

May 3, 2022

After looking everywhere for replacement blades for my bandsaw, finally I found these guys. very happy with my purchase. Well done

Raymond Chapman

Fits perfect

May 3, 2022

Fit my saw just right – very satisfied 10/10

Harry Barclay

Purchase Your Blade

Add More Item

1. Select the width you require

Video on how to select the Width

3. Select the Length (Round up to the Closest Increment)(Round up to the Closest Increment)

2. Now Enter the Exact Length in (mm) (Made to your Order)

Length is not correct, changed to maximum allow length.

Adjust the wheels of the machine to their correct position (about the middle of the adjustment range)

Refering to the diagram below, measure the distance between the centre point of each wheel in mm (measurement D).
Now measure the radius of each wheel in mm (R1 and R2).
Use this formula to calculate the band length

Video on how to select the Length

3. Select the TPI (Teeth Per Inch)

The number of teeth per inch (TPI) defines the pitch of the blade and can vary from 1 to 32 tpi.

On some blades there are different pitches on the same blade. You must select the correct tpi for the thickness of material you are cutting. If the corrrect tpi is not chosen the blade life will be dramatically shortened.

The general rule of thumb is: For wood and soft materials aim ffor 3-6 teeth in the work piece.