fbpx
HomeFAQWhat does this blade cut?
Home What does this blade cut?
18
Nov
What does this blade cut?
  • By Sawblade Admin
  • 0 Comments

    5 Easy Steps to Build Your Own Sawblade

    Welcome to the
    Sawblade.com.au
    Mobile App

    1. Product Selection

    Bi-metal M42 TimberTimber, Resawing, Hardwood and Softwood Bi-metal M42General Purpose Blade Bi-alfa Cobalt Extreme M51Solid, Thick-walled Tubes and all higher-grade alloys Bi-alfa ProfileSpecific to Metal Profile Cutting Bi-alfa WS ALUProvides outstanding performance on vibration susceptible cuts Bi-alfa Cobalt Master SupremePrecise perpendicular cuts with excellent surface finish Bi-alfa RPIdeal for hard materials, improving chip flow and blade life HM-Titan Alu TCTNon-ferrous metals and Best for plates and slabs HM-Titan BO TCTHardened and Tempered or induction hardened materials HM-Titan MU TCTDeveloped to cut a variety of different materials Carbon FlexbackWood / Plastic /Alumunium / Thin-Walled Tubes & Squares Carbon Thin GuageWood ( For Curves ) / Thin Plastic / Thin Aluminium Carbon RipperRipping Wood - Standard Quality - Cost effective Bi-metal RipperRipping Wood - Best Quality - Longer Lasting Meat & FishMeat / Bone / Fish / Carcass Splitting General Purpose Band knifeFoam / Food Slicing / Packaging Carbide GritCarbon fiber reinforced plastic (CRP) / Concrete / Glass / Industrial ceramics / Silicon materials / Cast iron/ Graphite/ Wire reinforced rubber Diamond Grit - ContinuousCarbon fiber reinforced plastic (CRP) / Concrete / Glass / Industrial ceramics / Silicon materials Diamond Grit - GulletedCarbon fiber reinforced plastic (CRP) / Concrete / Glass / Industrial ceramics / Silicon materials TCT for TimberSuper Hard Wood / Timber / Exotic Material Butcher Hand Saw BladesFish / Frozen fish or meat / Meat & Bone / Poultry Hacksaw BladesCorrosion-resistant / Light-weight

    2. Great job, now select the Width

    3. Select the Length (Round up to the Closest Increment)(Round up to the Closest Increment)

    3. Now Enter the Exact Length in (mm) (Made to your Order)

    Length is not correct, changed to maximum allow length.

    4. Select the TPI (Teeth Per Inch)

    The number of teeth per inch (TPI) defines the pitch of the blade and can vary from 1 to 32 tpi.

    On some blades there are different pitches on the same blade. You must select the correct tpi for the thickness of material you are cutting. If the corrrect tpi is not chosen the blade life will be dramatically shortened.

    The general rule of thumb is: For wood and soft materials aim ffor 3-6 teeth in the work piece.

    The number of teeth per inch (TPI) defines the pitch of the blade.

    On some blades there are different pitches on the same blade. You must select the correct tpi for the thickness of material you are cutting. If the corrrect tpi is not chosen the blade life will be dramatically shortened.

    Please use the following guide to select the correct tooth selection.









    5. Enter Quantity

    Order Your Blade

    Order Details:

    Add to Cart
    Add to Cart

      Related Posts
      0
      $0.00
      My Cart
      Empty Cart